4 Rocker Cover (Part Number: RK-02)
Sure Grip Control Handles are supplied with buttons bonded to the overlay that directly activate the switches. A Rocker Cover Kit is available that contains two styles of rockers and a small bottle of adhesive. The rocker permanently mounts across 2 horizontal or vertical buttons.

Installation Tips
Step 1: Place the Rocker Cover onto a pair of buttons, ensuring that the buttons locate properly into the recesses on the back side of the Rocker. Test the action to ensure that the buttons operate freely and the Rockers provide the desired feel for the operator. go to Acc. page

Step 2: Remove the Rocker and apply a drop of the adhesive to the top of the button and inside of the Rocker recess. Press the Rocker onto the buttons and hold for 1 minute to allow the adhesive to set. Check the action again to ensure that the switches operate correctly and then leave for 2 hours before using. Once a Rocker is glued to the embossed overlay it will be impossible to remove