"JL" Series Joystick Description
Sure Grip Controls NEW "JL" Series electronic joystick is a high-reliability extreme duty input device designed to be used in high cycle applications. The joystick is available with switched or proportional outputs in both single and dual axis spring-return-to-center configurations. The joystick comes standard with a basic "J" Series grip. It can also be custom configured with the “S”, “C” or “L” Series control grips.

The "JL" joystick also features our innovative “Gimbal” mounting system that allows the operator to easily adjust the orientation and mounting angle of the joystick in order to position it in the most comfortable operating position. This feature provides the ultimate in comfort and ergonomics for the operator and the most flexibility for equipment manufactures when designing the controls and seating arrangement. Click the image below for this feature.

The joystick housings are manufactured using high quality zinc alloy castings for strength and durability. The only two moving parts utilize high performance self lubricated polymers for maximum wear life and minimum maintenance.

Gimbal Mounting
The spherical body of the joystick is mounted within a two piece clamp that permits up to 20 degrees of adjustment/rotation in any direction. The operator simply lifts up the rubber boot to expose the adjustable clamp, loosens off the clamping screw and rotates the joystick assembly into the desired position.

Performance Specifications: (actual)
+ Output at maximum negative X or Y displacement: 8% +/- 4% of supply voltage
+ Actual Output at null (handle center): 50% +/- 2% of supply voltage
+ Output at maximum positive X or Y displacement: 92% +/- 4% of supply voltage
+ Maximum output current: 2mA (Outputs protected against shorts to supply or ground as long as supply voltage is within operational range, maximum survival voltage 18 VDC)

Switched Output Joystick
Momentary Switched:
24 VDC:3 amps.

Movement to Activate:
16 degrees, on axis (+/- 2 degrees)
22 degrees, at 45 degrees (+/- 2 degrees)

Common power wire to switches, spade connectors on wire harness. (If switching inductive loads, diode protection should be included in the circuit to maximum switch life)

Mechanical:
Maximum handle travel:
20 +/- 1 degrees (on axis)
28 +/- 1 degrees (at 45 degrees)
Force measured at bottom of faceplate (typical) to come out of center:
600 grams (on axis)
750 grams (at 45 degrees)
Force measured at bottom of faceplate (typical) at end of stroke:
750 grams (on axis)
900 grams (at 45 degrees)
Environmental Rating:
Joystick c/w J Series Basic Grip: IP-64
Joystick c/w any handle with trigger: IP-55

The pivot ball and centering shoe are molded using a high performance polymer-teflon blend that eliminates the need for additional lubricant. The joystick is designed to operate without the use of lubricating oil or grease.